BCB Combination Valve to Master Cylinder Line

Item # BCB-S2-SSL-COMBO-TO-MASTER

Availability: In stock

item Description

Stainless Steel Braided brake lines to connect the Master Cylinder to the Combination valve on your Scout 2, Traveler, or Terra. DOT Approved made in the USA. Please see item details for more info.

$59.95
BCB Combination Valve to Master Cylinder Line
Zoom Out
Zoom In

You may also be interested in the following product(s)

Brake Combination Valve " DISK / DISK Brake Combination Valve " DISK / DRUM

Quick Overview

The old lines are rusty, pitted and that’s an unsafe weak link. Prevent a catastrophic brake failure by using these new lines. Even if your lines look good, in between the nuts and the lines they are usually corroded beyond removing them without damage. These also flex allowing much easier installation.

Customer Reviews

4 Item(s)

per page
Excellent Review by GirlScout
Price
Value
Quality
ordered these and got them 3 days later. Installed, bled the brakes and no problems. I like the IH color coded ends :) (Posted on 8/19/14)
Great idea Review by Tom-79 Scout
Price
Value
Quality
Excellent quality and built in the USA by John himself. My brakes were getting overhauled by the local shop and they found the lines were pitted. I drove down to see if they were BS-ing me and sure enough they were not. I searched the Internet and the same shop i used 10 years ago to build my 76 Scout Traveler popped up. John has done it again and come up with a great product to solve a problem. Thanks for the upgrade and solution. You guys are top on my togo to list for the next phase of my buildup.
(Posted on 8/13/14)
Too easy to install!! Review by BigScout
Price
Value
Quality
My old lines were a pain in the *** to install. I always fought to get the first thread to catch. This go around i broke the line by the nut as it was rusted fast to the line. I looked around and found BCB. Glad they had the solution and i am happy with the new custom lines. John even called a month later to ask how i liked them. Who does that? I will be back for my rear disk brake kit with service like that. (Posted on 5/30/14)
Perfect fit and easy to install Review by CustomScout
Price
Value
Quality
These lines make swapping the master cylinder easy as i did not have to fight the threads to catch and tighten up. John suggested i cut the nut off after I installed these and sure enough where I could not see the line was rusted with pitting. The look awesome on my custom Scout 2 and i will return to buy more stuff due to his extra help on the phone. (Posted on 4/4/14)

4 Item(s)

per page

Write Your Own Review

You're reviewing: BCB Combination Valve to Master Cylinder Line

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price
Value
Quality

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.